NFS Howto Submissions nfs krb5

From Linux NFS

Revision as of 16:36, 11 April 2006 by Csmithere (Talk | contribs)
Jump to: navigation, search

Contents

Kerberos and NFS

Kerberos can be used to provide both mutual authentication (validating both the client and server prior to transmitting data) and encryption for data sent via NFS. This is implemented with the RPCSEC_GSS security flavor of ONC RPC protocol, defined by RFC 1831 and RFC 2203. This sub-section of NFS Howto: Security attempts to provide a complete and accurate cookbook configuration guide for how to get Kerberos validation / authentication working with NFSv3/NFSv4 mount points.

Requirements
  • /etc/services should have entries in it for port 2049 for both TCP and UDP NFS. This should be present in virtually every modern version of Linux, but it warrants mentioning.
  • A working Kerberos realm for all of your NFS clients and server to authenticate against.
  • A working NTP configuration on all hosts participating in your Kerberos realm. This will insure that the system clocks on your machines are set to matching times.
  • Proper forward/reverse name FQDN/IP resolution must be working in DNS, or, at a minimum, the /etc/hosts file must contain this information. The machine's hostname must also not be included on the localhost line, aka:
[cmsmith@client ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               localhost.localdomain localhost
10.161.131.10       client.netapp.com client

Is ok. Whereas this:

[cmsmith@client ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               localhost.localdomain client localhost 

is not.

Kerberos Configuration

To use Kerberized NFS, we need to add the following into /etc/sysconfig/nfs to start the necessary additional daemons on the client:

# echo "SECURE_NFS=YES" >> /etc/sysconfig/nfs

Next, create an NFS principal for the host(s) that will be involved in NFS transactions. This means that both the NFS server and the NFS client need to have a special principal in place. Create them as follows:

# kadmin
Authenticating as principal root/admin@SOURCEFORGE.NET with password.
Password for root/admin@SOURCEFORGE.NET: 
kadmin: addprinc -randkey nfs/client.sourceforge.net
WARNING: no policy specified for nfs/client.sourceforge.net@SOURCEFORGE.NET; defaulting to no policy
Principal "nfs/client.sourceforge.net@SOURCEFORGE.COM" created.

On each of the clients, download the necessary principals to the local keytab file using ktadd. As an example, for the NFS client secondus.rdu.kronos.net would require you to run:

# kadmin
kadmin: ktadd nfs/client.sourceforge.net
Entry for principal nfs/client.sourceforge.net with kvno 4, encryption type DES cbc mode with CRC-32 
added to keytab WRFILE:/etc/krb5.keytab.
NFSv3 Specifics
NFSv4 Specifics

SPKM and NFS

Personal tools