FedFsOpenLdapServer0.9

From Linux NFS

Revision as of 00:06, 2 October 2012 by Chucklever (Talk | contribs)
Jump to: navigation, search

Contents

Project: fedfs-utils

[ Project Home | News | Downloads | Docs | Mailing Lists | Source Control | Issues ]


Configuring an OpenLDAP server for use with FedFS

These instructions are useful with Fedora 16 and following.

A reference web article:

 http://docs.fedoraproject.org/en-US/Fedora/15/html/Deployment_Guide/ch-Directory_Servers.html

Uninstalling

If at any point you find the need to erase everything and start over, use:

# systemctl stop slapd.service
# systemctl disable slapd.service
# rm -rf /etc/openldap /var/lib/ldap
# yum erase openldap-servers openldap-clients

This removes all slapd instances and software.

Networking pre-requisites

Unless this LDAP server installation will be accessed only via localhost, the hosting OS must be assigned a fixed IP address with a consistent forward and reverse DNS mapping.

On some RH-based distributions, networking doesn't start until a user logs in on the console. If this is the case, configure the system's network to start automatically.

By default on modern RH-based distributions, an IP-based firewall is enabled during a typical install. Allow other systems to access the LDAP service on this machine by adjusting the firewall configuration. On Fedora 16, the firewall configurator is at Applications -> Other -> Firewall. You can poke a hole for LDAP in the "Other Ports" section. Be sure to open "ldap," "ldaps," and "ldap-admin." Or disable the firewall entirely if you are sure that's safe to do.

Install OpenLDAP server package

After installing, updating, and configuring Fedora, install the OpenLDAP server components with:

# yum install openldap openldap-clients openldap-servers

This command adds a new UID and GID, which is user and group "ldap", (55, 55).

Copy in the DB_CONFIG file (why doesn't the package install do this automatically?)

# cp /usr/share/openldap-servers/DB_CONFIG.example /var/lib/ldap/DB_CONFIG
# chown ldap.ldap /var/lib/ldap/DB_CONFIG

Install the fedfs schema

Extract the FedFS schema from the LDAP/NSDB draft. Copy the result to /etc/openldap/schema/fedfs.schema. Ensure that the security context, group, owner, and mode bits match the other files in this directory. See also:

 http://www.openldap.org/doc/admin/schema.html

or

 http://www.zytrax.com/books/ldap/ch6/slapd-config.html

Create an encrypted administrator password

This step generates the value of the LDAP administrator password, but doesn't actually set it. The purpose of this step is to ensure that the password is stored by LDAP as an encrypted value.

$ slappasswd
New password:
Re-enter new password:
{SSHA}MP0BeMJzmCoCi5olBhwcRDYJaGBFgN5K

Copy the final encrypted output (e.g. {SSHA}MP0BeMJzmCoCi5olBhwcRDYJaGBFgN5K) for use below.

For an NSDB that will be used during testing events on secure networks, an easy-to-type well-known administrator password is advised. "test123" or "cthon201x" are typical values. Otherwise, a stronger password is recommended.

Generally, separate passwords are created for "cn=config" and the entity that administers the dc=example,dc=net DIT. Repeat the steps above to generate a second password, if desired.

Configure the LDAP server

Install the sample configuration file

# cp /usr/share/openldap-servers/slapd.conf.obsolete /etc/openldap/slapd.conf

Edit this file:

  1. Just after "database config", add:
    1. rootdn "cn=admin,cn=config"
    2. rootpw <your hashed PW created above>
  2. Replace "dc=my-domain,dc=com" everywhere with your local domain name
  3. Just after "database hdb", add:
    1. rootdn "cn=Manager,dc=your-domain,dc=net"
    2. rootpw <your hashed password created above>
  4. Merge the FedFS schema
    1. Either add an include directive for the fedfs.schema file added above
    2. Or use the LDAP OLC configuration tool in fedfs-utils/contrib/ldap to add the schema dynamically after the server is running

Test the new configuration:

# slaptest -u -f /etc/openldap/slapd.conf

Correct any errors before continuing. Then build the new configuration:

# cd /etc/openldap
# rm -rf slapd.d/*
# slaptest -f ./slapd.conf -F ./slapd.d
# mv slapd.conf slapd.conf.bak
# chown -R ldap:ldap ./slapd.d

Create an entry for the dc naming context

This prepares the LDAP server for the creation of an NCE under dc=your-domain,dc=net. If you're going to create your NCE somewhere else, skip this step.

slapd must be stopped. Edit the file /tmp/ldif and add only these lines:

dn: dc=your-domain,dc=net
objectClass: domain
dc: your-domain

Then run these commands:

# slapadd -l /tmp/ldif
# chown -R ldap:ldap /var/lib/ldap

Create a database for a top-level FedFS context

This prepares the LDAP server for the creation of a top-level NCE. If you're going to create your NCE somewhere else, skip this step.

slapd must be stopped. Edit the file /tmp/ldif and add only these lines:

dn: olcDatabase=bdb,cn=config
objectClass: olcBdbConfig
olcDatabase: bdb
olcDbDirectory: /var/lib/ldap/fedfs
olcSuffix: your NCE DN

Then run these commands:

# mkdir /path/to/database
# slapadd -l /tmp/ldif
# chown -R ldap.ldap /path/to/database

Configure logging

First:

# touch /var/log/slapd
# chown ldap:ldap /var/log/slapd

Edit /etc/rsyslog.conf and add a line like this: "local4.* /var/log/slapd" and restart rsyslogd.

In /etc/sysconfig/ldap, uncomment the SLAPD_OPTIONS line, and add "-s ###" where the ### is some set of or'd flags indicating what you'd like logged. Restart slapd.

Start the server

To start the server once:

# systemctl start slapd.service

To start the server automatically during system boot:

# systemctl enable slapd.service

To stop the server once:

# systemctl stop slapd.service

To prevent the server from starting during system boot:

# systemctl disable slapd.service
Personal tools