NFS for AFS users

From Linux NFS

(Difference between revisions)
Jump to: navigation, search
(volume management and migration)
(volume management and migration)
Line 24: Line 24:
For NFS migration we need to preserve filehandles, so need to migrate at the block level or using fs-specific send/receive.  The protocol can be handled by migrating only entire servers or containers, so that migration can be treated as a server reboot.
For NFS migration we need to preserve filehandles, so need to migrate at the block level or using fs-specific send/receive.  The protocol can be handled by migrating only entire servers or containers, so that migration can be treated as a server reboot.
 +
 +
A few options for send/receive:
 +
 +
* thin_delta (from device-mapper-persistent-data) can calculate a metadata-level diff between two volumes.  Additional work would be needed to extract the actual data and produce a diff; that would complete the "send" side.  We'd also need a "receive" side that could apply the diff and reconstitute the snapshot on the other side.  This is being actively worked on.  For NFS, on the read-write server we would take a snapshot of the exported volume before sending.  On the receive side, after creating the updated snapshot, we would stop the server, unmount the old snapshot, mount the new one, and restart; clients should see only a brief delay.
 +
 +
* btrfs-send/btrfs-receive: this is probably the best-tested send/receive functionality currently available, so if we wanted to start work on a prototype right now, this might be an option.
 +
 +
* xfs volumes loopback-mounted on a backing xfs filesystem, using reflink for snapshots.  (See https://lwn.net/Articles/747633/ for some background.) Looks promising, the basic kernel interfaces to find shared extents and such are there, but a lot of userland code remains to be written.
 +
 +
* stratis: this operates at a layer of abstraction over the above.  But that might be the layer we want to actually interact with?
 +
 +
* lvmsync: looks possibly unmaintained?  We wouldn't want to depend on this.  But possibly it could be a proof of concept or starting point.
Between LVM and (container-respecting) knfsd, we have a lot of the necessary pieces, but there's at a minimum a lot of tooling and documentation to write before this is usable.
Between LVM and (container-respecting) knfsd, we have a lot of the necessary pieces, but there's at a minimum a lot of tooling and documentation to write before this is usable.
-
Possible tools at our disposal: LVM, btrfs, [https://tools.ietf.org/html/rfc5661#section-11.9 fs_locations], [https://tools.ietf.org/html/rfc5661#section-11.10 fs_locations_info], [https://datatracker.ietf.org/doc/rfc8435/ pnfs flexfiles].  [https://wiki.linux-nfs.org/wiki/index.php/FedFsUtilsProject FedFS] (dormant but worth keeping in mind), [https://github.com/nfs-ganesha/nfs-ganesha/wiki Ganesha], [https://docs.ceph.com/docs/master/cephfs/nfs/ Ganesha/Ceph] (which [https://jtlayton.wordpress.com/2018/12/10/deploying-an-active-active-nfs-cluster-over-cephfs/ may be capable of multiple read/write servers now]).
+
Clients could be configured to mount particular servers by hand, or they could mount any server and then use [https://tools.ietf.org/html/rfc5661#section-11.9 fs_locations], [https://tools.ietf.org/html/rfc5661#section-11.10 fs_locations_info], or maybe even [https://datatracker.ietf.org/doc/rfc8435/ pnfs flexfiles] to get lists of servers hosting replicas and pick oneThey would need some heuristics to make the right choice. It would also be nice if clients could fail over to a different replica when one goes down.
-
Possibly interesting dm targets:
+
We can assemble a global namespace out of volumes using referrals.  For a higher-level approach more similar to AFS's, there's also [https://wiki.linux-nfs.org/wiki/index.php/FedFsUtilsProject FedFS] (dormant but worth keeping in mind).
-
* [https://www.kernel.org/doc/Documentation/device-mapper/snapshot.txt dm-snapshot] and related targets.
+
We also have [https://github.com/nfs-ganesha/nfs-ganesha/wiki Ganesha], [https://docs.ceph.com/docs/master/cephfs/nfs/ Ganesha/Ceph] (which [https://jtlayton.wordpress.com/2018/12/10/deploying-an-active-active-nfs-cluster-over-cephfs/ may be capable of multiple read/write servers now]).
-
* [https://www.kernel.org/doc/html/latest/admin-guide/device-mapper/dm-clone.html dm-clone]
+
-
* [https://www.cloudandheat.com/block-level-data-tracking-using-davice-mappers-dm-era/ dm-era] may help with efficient incremental updates of read-only replicas?
+
-
[https://docs.openafs.org/AdminGuide/HDRWQ177.html AFS Administrator's guide, Chapter 5: Managing Volumes]
+
See also [https://docs.openafs.org/AdminGuide/HDRWQ177.html AFS Administrator's guide, Chapter 5: Managing Volumes]
A partial alternative may be [https://wiki.linux-nfs.org/wiki/index.php/NFS_re-export NFS proxying].  Like read-only replicas, proxies should be able to hide latency by moving cached data closer to far-flung clients, and scale bandwidth to read-mostly data by taking load off the original server.
A partial alternative may be [https://wiki.linux-nfs.org/wiki/index.php/NFS_re-export NFS proxying].  Like read-only replicas, proxies should be able to hide latency by moving cached data closer to far-flung clients, and scale bandwidth to read-mostly data by taking load off the original server.
Line 43: Line 53:
A disadvantage may be that AFS users seem to like that infrastructure (the volume abstraction and the VLDB).
A disadvantage may be that AFS users seem to like that infrastructure (the volume abstraction and the VLDB).
-
Latency-hiding may be particularly tricky; delegation and caching policies may need rethinking.
+
Latency-hiding may be particularly tricky; delegation and caching policies may need rethinking. Performance will be more complicated to understand compared to AFS-like read-only replicas.
 +
 
 +
AFS-like volume replication has a problem: when new read-only versions are released, they may modify or delete entirely files that are in use by running processes.  I'd expect application crashes.  I wonder how AFS administrators deal with that now?
-
The AFS approach has a problem that I don't understand: when new read-only versions are released, they may modify or delete entirely files that are in use by running processes. I'd expect application crashes.  I wonder how AFS administrators deal with that now?
+
My impression is that AFS doesn't reliably prevent this problem, so instead AFS administrators work around it, for example by keeping old versions of binaries in place (and using symlinks to direct users to the newest versions).
-
Possible approaches to fix the problem if we were to do something similar in the NFS case:
+
Possible approaches to fix the problem if we wanted to:
* Provide some protocol which tracks which files may be open on read-only replicas so that we know not to free those files when they're unlinked.
* Provide some protocol which tracks which files may be open on read-only replicas so that we know not to free those files when they're unlinked.
-
* When we distribute new versions, allow the read-only replicas to keep around older versions and serve files from them in the case filehandle lookups against the new copy fail, to be removed only after applications stop referencing them.  Hopefully this can be done space-efficiently if the different versions on the replica servers can be represented as dm snapshots.
+
* When we distribute new versions, allow servers to keep around older versions and serve files from them in the case filehandle lookups against the new copy fail, to be removed only after applications stop referencing them.  Hopefully this can be done space-efficiently if the different versions on the replica servers can be represented as dm snapshots.
If we use NFSv4 proxies instead, proxies will hold opens or delegations on the files on the original server, which will prevent their being deleted while in use.  The problem is server reboots.  That's partially worked around with silly-rename.  Server-side silly-rename would be a more complete solution.
If we use NFSv4 proxies instead, proxies will hold opens or delegations on the files on the original server, which will prevent their being deleted while in use.  The problem is server reboots.  That's partially worked around with silly-rename.  Server-side silly-rename would be a more complete solution.

Revision as of 14:29, 4 February 2021

This page tracks some of the obstacles that might keep an AFS user from using NFS instead.

Contents

Missing Features

In general: AFS is administered by a consistent set of commands (fs, pts, vos, uss, bos, backup, fstrace, etc.) which work from any client and identify the user with Kerberos. Compared to a traditional unix system it's more flexible about delegating rights to users to do stuff.

volume management and migration

AFS has a "Volume Location Database" that tracks where (machine and partition) a volume is located.

Fast clones using COW are supported, along with complete copies on other machines.

Currently there can be only one writeable version of a volume, but multiple read-only versions (which all have to be identical). They can be on different servers.

There can also be a 'backup' volume which is just, say, a daily temporary read-only snapshot of a RW volume and has to be located on the same machine.

When a RW volume is "released" (snapshotted) to the RO volumes, all the RO volumes update simultaneously and atomically. The users, in theory, don't notice as the volumes don't go offline - and then they see all the changes happen at once. There is coordination handling for when one or more of the fileservers or the Volume Location servers are offline.

Volumes can be migrated between machines whilst in active use without the user in theory noticing anything.

There are moves afoot to add multi-hosted RW volumes, but I'm not sure how that'll work, and may involve Ceph integration. But it's not there yet.

Logical volumes is something they particularly like. You can make a volume for a purpose; give particular people access to it, give it some storage, expand and contract it and move it around. It's intrinsically quota'd.

For NFS migration we need to preserve filehandles, so need to migrate at the block level or using fs-specific send/receive. The protocol can be handled by migrating only entire servers or containers, so that migration can be treated as a server reboot.

A few options for send/receive:

  • thin_delta (from device-mapper-persistent-data) can calculate a metadata-level diff between two volumes. Additional work would be needed to extract the actual data and produce a diff; that would complete the "send" side. We'd also need a "receive" side that could apply the diff and reconstitute the snapshot on the other side. This is being actively worked on. For NFS, on the read-write server we would take a snapshot of the exported volume before sending. On the receive side, after creating the updated snapshot, we would stop the server, unmount the old snapshot, mount the new one, and restart; clients should see only a brief delay.
  • btrfs-send/btrfs-receive: this is probably the best-tested send/receive functionality currently available, so if we wanted to start work on a prototype right now, this might be an option.
  • xfs volumes loopback-mounted on a backing xfs filesystem, using reflink for snapshots. (See https://lwn.net/Articles/747633/ for some background.) Looks promising, the basic kernel interfaces to find shared extents and such are there, but a lot of userland code remains to be written.
  • stratis: this operates at a layer of abstraction over the above. But that might be the layer we want to actually interact with?
  • lvmsync: looks possibly unmaintained? We wouldn't want to depend on this. But possibly it could be a proof of concept or starting point.

Between LVM and (container-respecting) knfsd, we have a lot of the necessary pieces, but there's at a minimum a lot of tooling and documentation to write before this is usable.

Clients could be configured to mount particular servers by hand, or they could mount any server and then use fs_locations, fs_locations_info, or maybe even pnfs flexfiles to get lists of servers hosting replicas and pick one. They would need some heuristics to make the right choice. It would also be nice if clients could fail over to a different replica when one goes down.

We can assemble a global namespace out of volumes using referrals. For a higher-level approach more similar to AFS's, there's also FedFS (dormant but worth keeping in mind).

We also have Ganesha, Ganesha/Ceph (which may be capable of multiple read/write servers now).

See also AFS Administrator's guide, Chapter 5: Managing Volumes

A partial alternative may be NFS proxying. Like read-only replicas, proxies should be able to hide latency by moving cached data closer to far-flung clients, and scale bandwidth to read-mostly data by taking load off the original server.

Advantages are that we already have seen reports of some success here, using the NFS re-export code together with fscache. And I think there are a lot of opportunities for incremental progress by fixing problems with existing NFS code, rather than larger and riskier projects that build new infrastructure.

A disadvantage may be that AFS users seem to like that infrastructure (the volume abstraction and the VLDB).

Latency-hiding may be particularly tricky; delegation and caching policies may need rethinking. Performance will be more complicated to understand compared to AFS-like read-only replicas.

AFS-like volume replication has a problem: when new read-only versions are released, they may modify or delete entirely files that are in use by running processes. I'd expect application crashes. I wonder how AFS administrators deal with that now?

My impression is that AFS doesn't reliably prevent this problem, so instead AFS administrators work around it, for example by keeping old versions of binaries in place (and using symlinks to direct users to the newest versions).

Possible approaches to fix the problem if we wanted to:

  • Provide some protocol which tracks which files may be open on read-only replicas so that we know not to free those files when they're unlinked.
  • When we distribute new versions, allow servers to keep around older versions and serve files from them in the case filehandle lookups against the new copy fail, to be removed only after applications stop referencing them. Hopefully this can be done space-efficiently if the different versions on the replica servers can be represented as dm snapshots.

If we use NFSv4 proxies instead, proxies will hold opens or delegations on the files on the original server, which will prevent their being deleted while in use. The problem is server reboots. That's partially worked around with silly-rename. Server-side silly-rename would be a more complete solution.

PAGS

PAGs: AFS allows a group of processes to share a common identity, different from the local uid, for the purposes of accessing an AFS filesystem: https://docs.openafs.org/AdminGuide/HDRWQ63.html

Dave Howells says: "This is why I added session keyrings. You can run a process in a new keyring and give it new tokens. systemd kind of stuck a spike in that, though, by doing their own incompatible thing with their user manager service....

NFS would need to do what the in-kernel AFS client does and call request_key() on entry to each filesystem method that doesn't take a file* and use that to cache the credentials it is using. If there is no key, it can make one up on the spot and stick the uid/gid/groups in there. This would then need to be handed down to the sunrpc protocol to define the security creds to use.

The key used to open a file would then need to be cached in the file struct private data."

ACLs

NFSv4 has ACLs, but Linux filesystems only support "posix" ACLs. An attempt was made to support NFSv4 ACLs ("richacls") but hasn't been accepted upstream. So knfsd is stuck mapping between NFSv4 and posix ACLs. Posix ACLs are more coarse-grained than NFSv4 ACLs, so information can be lost when a user on an NFSv4 client sets an ACL. This makes ACLs confusing and less useful.

There are other servers that support full NFSv4 ACLs, so users of those servers are better off. Our client-side tools could still use some improvements for those users, though.

AFS ACLs, unfortunately, are yet again a third style of ACL, incompatible with both POSIX and NFSv4 ACLs. They are more fine-grained than POSIX ACLs and probably closer to NFSv4 ACLs overall.

To do:

  • make NFSv4 ACL tools more usable:
    • Map groups of NFSv4 permission bits to read, write, and execute permissions so we only have to display the simpler bits in common cases
    • Look for other opportunities to simplify display and editing of NFSv4 ACLs
    • Add NFSv4 ACL support to graphical file managers like GNOME Files
    • Adopt a commandline interface that's more similar to the posix acl utilities.
    • Perhaps also look into https://github.com/kvaneesh/richacl-tools as an alternative starting point to nfs4-acl-tools.
    • In general, try to make NFSv4 ACL management more similar to management of existing posix ACLs.
  • For AFS->NFS transition:
    • Write code that translates AFS ACLs to NFSv4 ACLs. It should be possible to do this with little or no loss of information for servers with full NFSv4 ACL support.
    • For migrations to Linux knfsd, this will effectively translate AFS ACLs to POSIX ACLs, and information will be lost. Test this case. The conversion tool should be able to fetch the ACLs after setting them, compare results, and summarize the results of the conversion in a way that's usable even for conversions of large numbers of files. I believe that setting an ACL is enough to invalidate the client's ACL cache, so a subsequent fetch of an ACL should show the results of any server-side mapping. But, test this to make sure. More details on AFS to NFSv4 ACL conversion
  • more ambitious options:
    • Try reviving Rich ACLs. Maybe we could convince people this time. Or maybe there's a different approach that would work. Maybe we could find a more incremental route, e.g. by adding some features of richacls to POSIX ACLs, such as the separation of directory write permissions into add and delete, and of file write permissions into modify and append.

user and group management

AFS has a "protection server" and you can communicate with it using the pts command which allows you to set up users and groups and add ACEs for machines.

Compared to traditional unix, it allows wider delegation of management. For example, group creation doesn't require root: https://docs.openafs.org/Reference/1/pts_creategroup.html. Groups have owners, and you can delegate management of group membership: https://docs.openafs.org/Reference/1/pts_adduser.html.

Our equivalent to the AFS protection server is FreeIPA. See also https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/configuring_and_managing_identity_management/index. Installing FreeIPA and experimenting is also useful.

Unlike AFS, FreeIPA doesn't seem to make it easy for ordinary users to create groups. It does allow delegating group management (including adding and removing users). More details on AFS-like group management with FreeIPA.

global namespace

On an AFS client by default you can look up something like /afs/umich.edu/... and reach files kept in AFS anywhere.

We have automounting support, NFS has standards for DNS discovery of server, so in theory this is all possible. Handling kerberos users across domains would be interesting.

migrating existing AFS installations to NFS

Once NFS does everything AFS does, there's still the question of how you'd migrate over a particular installation.

There's a standard AFS dump format (used by vos dump/vos restore) that might be worth looking at. It looks simple enough. Maybe also look at cmu-dumpscan.

See also AFS to NFSv4 ACL conversion.

Personal tools